Solar Water Heater

Feature: 1) Well wind and snow resistance 2) resistance to corrosion 3) A long time of heat preservation. 4) Meeting the requirement of washing clothes, abstersion and bathing 5)make up water automatically and stop making up if the tank is full Specifications: 1) material of inner tank: SUS304 Stainless steel 2) material of outer tank:

Feature: 1) Well wind and snow resistance 2) resistance to corrosion 3) A long time of heat preservation. 4) Meeting the requirement of washing clothes, abstersion and bathing 5)make up water automatically and stop making up if the tank is full

This type uses the all-glass evacuated solar collector tubes as the heat-absorbing element. the high vacuum degree of the clearance between the outer and inner tubes reduces the heat emission which is caused by convection and conduction. The layer films(coating) of the all-glass evacuated tubes transfer the sun energy into heat energy. Depending on

transfer to the conduct pipe via aluminium fin , the media in conduct pipe will deliver the energy to the tank to make whole tank water temperature increasing gradually. As no water in tube ,the tube can bear the pressure, it will avoid the situation of one tube break all water in tank will flow out. When we take the hot water for shower, cold

The evacuated tubes which are slid onto a U-shaped heat transfer unit absord to absorb the sun energy and transform it into heat. The water or frost protection agent-water mixture flows through the U-shaped conduit.As a result, the liquid is heated. When the required tempetature is reached, the pump in the solar circuit is activated by the controll

4)The insulation of water tank used polyurethane with high pressure foaming, 50 mm thickness, heat preservation 72 hours, The teperature 2℃ to 3℃ every 24hours during lasted rainy days. 5)Water heater is equipped with the working medium expansion tank, collection hot medium without any leak, low temperature resistance, not frozez at 30 degre

three cabins type solar water heater is different from traditional single cabin structure and own original three cabins classification structure layout. The appearance for whole device is concise and atmosphere. One,two and three class of functional domain are buckled together one by one at one go.super performance,stable operation well,Under any

Solar water heater for balcony is special for : all the system is worked at a pressurized surroundings, the vacuum tube will never be scaled,also can work at a very low temperature. 1)The collector is installed at the balcony which is faced the sun, the tank and frame are hide in side, it owns a beautiful appearance and a good wind resistance. Th

1)collector and storage tank is separation, pressure operation. The starage tank can be place anywhere you wanted. 2)Circulation pump make the medium cycle in the circulation line. Through the heat exchanger, it transfer the heat ennergy collected by solar collector to heat storage tank. 3)Metal heat pipe collector, no water insied the vacuum tu

Model number:ONS-FCP01 Description: 1) Well wind and snow resistance 2) resistance to corrosion 3) A long time of heat preservation. 4) Meeting the requirement of washing clothes, abstersion and bathing.

1)it takes advantage of the tap water's pressure. The more pressure, the more comfort 2)The water is rapidly heated. Therefore, the hot produced water has very good quality. 3)It can produce more hot water than the general types,because it is not restricted by the volume of the tank.

Pressurized solar water heater, with full name of phase-change heat conduction full pressure solar water heater, adopts phase-change heat conduction tube which consists of vacuum tube, phase change heat pipe and heat transfer aluminum-wing. Benefiting from vacuum tube’s high solar absorptance and low reflectivity coating, it transfers solar radiati

Flat plate solar water heater has a simple operating principle. Generally ,the sunshine via the lucid plate then reach to the heat collector which has absoring coating in surface . most parts of sunshine can be absorbed by the heat collector then transfer to hot energy flow to the media in the flat plate , the cold media which in bottom of collecto

In the chest of no pressure tank have been set a prtesurrized copper coil,the water of the tank can be naturally cycle with that of collector’s. Washing water turn hot through the heat exchange between the copper coil and the hot water in the tank,and so can have pressure spray. Copper coil is increased cost, but the heat transfer ability greatly

Description: This type of product is designed to let water be in and out through double pipe, make the water be up automatically. The system can be closed when the water tank is full, and the water will keep full all the time, so we can use it very easily, and it is popular in the market now.

1) Well wind and snow resistance 2) resistance to corrosion 3) A long time of heat preservation. 4) Meeting the requirement of washing clothes, abstersion and bathing 5)make up water automatically and stop making up if the tank is full

1) material of inner tank: SUS304 Stainless steel 2) material of outer tank: SUS304 Stainless steel 3) bracket materail: Stainless steel 4) heat preservation: 72-80h 5) insulation: polyurethane

Feature: 1) Well wind and snow resistance 2) resistance to corrosion 3) A long time of heat preservation. 4) Meeting the requirement of washing clothes, abstersion and bathing